9-7X V8-6.0L (2008)
2. Partially install the front bracket retaining bolts.
3. Carefully pull down on the rearward edge of the headliner in order to expose the rear bolt installation area.
4. Partially install the rear bracket retaining bolt.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
5. Fully seat the retaining bolts.
Tighten the bolts to 10 Nm (88 in. lbs.).
6. Install the two rear overhead console carrier screws (1).
Tighten the screws to 1.2 Nm (10 in. lbs.).
7. Install the video display assembly. Refer to Video Display Replacement (See: Television / Monitor/Service and Repair).
8. Verify the video display for proper operation.
9. Close the video display screen.
10. Install the bolt cover bezel.
