9-7X V8-6.0L (2008)
Trunk / Liftgate Striker: Service and Repair
Liftgate Window Outside Handle and Latch Striker Replacement
Liftgate Window Outside Handle and Latch Striker Replacement
Removal Procedure
1. Open the liftgate window.
2. Remove the nuts retaining the striker assembly to the liftgate window.
3. Remove the handle and striker assembly from the liftgate window.
Installation Procedure
1. Install the handle and striker assembly to the liftgate window.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the nuts retaining the striker assembly to the liftgate window.
Tighten the nuts to 6 Nm (53 in. lbs.).
3. Check the liftgate window for proper operation, adjust if necessary. Refer to Liftgate Window Latch Striker Adjustment (See: Trunk / Liftgate
Latch/Adjustments).