9-7X V8-6.0L (2008)
Structural Brace: Service and Repair
Frame Brace Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the 2 mounting bolts from the frame brace.
3. Remove the frame brace from the frame.
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
1. Install the frame brace to the frame using the 2 mounting bolts.
Tighten the bolts to 20 Nm (15 ft. lbs.).
2. Lower the vehicle.
