9-7X V8-6.0L (2008)
5. Install the nuts which retain the seat pan to the seat assembly.
Tighten the nuts to 25 Nm (18 ft. lbs.).
6. Install the 3 seat switch bezel screws. Refer to Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement (See: Seats/Service and
Repair/Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement).
7. Calibrate the seat. Refer to Memory Seat Calibration (See: Mirrors/Memory Positioning Systems/Seat Memory Switch/Service and
Repair/Procedures).