9-7X V8-6.0L (2008)
5. Connect the electrical connectors (2) to the SDM (1).
6. Return the carpet to the fully installed position.
7. Install the console mounting bracket to the floor panel. Refer to Floor Console Bracket Replacement (See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair/Floor Console Bracket Replacement).
8. Install the floor console. Refer to Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Console
Replacement).
Important: The AIR BAG indicator may remain ON after the SDM has been replaced. DTC B1001 may set requiring the SDM part
number to be set in multiple modules. If the indicator remains ON after enabling the SIR system, perform the diagnostic system check
and follow the steps thoroughly to ensure that the SDM is set up properly.
9. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
