900 L4-1985cc 2.0L (1982)
P/N 83-69-829
O-Ring
M82-84
P/N 81-25-049
Bolt
M82-84
P/N 80-83-982
Bolt
M82-83
P/N 81-25-247
Bolt
M84
P/N 80-84-006
Bolt
M82-83
P/N 81-25-262
Bolt
M84
Claim Information:
Use a regular warranty claim form for repairs specifically covered by this Service Campaign. Follow the claim instructions given below for the repair of
a separated pulley. Inspection claims will not be accepted.
There is no time given for an inspection only. An initial check (see diagram A, next page) is made at the routine maintenance services and only takes
about 2 minutes.
Failure Code:
10406-07-0-02-02
Parts Allowance:
Fill in parts used. Use current dealer net.
Labor Allowance:
Replace pulley M82-83 - Use Labor Operation #21513 (0.9 hour).
Replace pulley M84 - Use Labor Operation #21514 (2.0 hour).
Reimbursement For Prior Repair:
An owner of a 1982-84 Saab that has had a crankshaft pulley replaced due to separation prior to this campaign is eligible for reimbursement by
Saab-Scania of America.
Review the previous repair documentation with the owner and determine if the eligibility requirements for reimbursement as described in this bulletin
(pulley separation only, 1982-84 models) have been met.
If eligibility requirements are met, advise the owner as follows:
1.
Owners should be instructed to submit requests for reimbursement to the Consumer Relations Representative in the appropriate Regional Office in
Orange, Conn.; Schiller Park, IL; or Carson, CA. They must include documentation which clearly specifies the repair and relevant charges for
parts and labor.
2.
Reimbursement will be made for the amount paid by the owner which is directly related to the failure of the crankshaft pulley. This includes oil
pump cover or engine damage if caused specifically by crankshaft pulley separation.
3.
All reimbursements will be handled by Saab-Scania of America.
4.
Upon referral to Saab-Scania of America, all further correspondence with the owner will be handled by Saab.
