saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Fuel Level Transmitter - Adapter Kit|Page 2716 > < Oil Pressure Switch - Revised Design
Page 1
background image

Fuel Gauge Sender: Technical Service Bulletins
Fuel Level Transmitter - Adapter Kit

SUBJECT:
REVISED INSTRUCTIONS, ADAPTING M83 FUEL LEVEL TRANSMITTER TO M81-82 CARS

ISSUE:

08/84-700

FILE IN S.I.MANUAL:
VOLUME:

I

SECTION:

3

PAGE:

80

SUPERSEDES S.I. 11/83-653

An adapter kit (P/N 85-46-491) with revised installation instructions and electrical hardware is now available. The new kit replaces earlier versions and
was designed to simplify the installation process and provide electrical connections similar to those found in the Recall 257 (S.I. 05/84-688, Volume II).
We recommend that Recall 257 be performed in conjunction with this installation.

Parts Required:

Adapter Kit           - 

85-46-491

Recall 257 Wiring Kit - 85-47-002

The Fuel Level Adapter Kit was originally introduced to alleviate recurring problems with sticking fuel level transmitters in 1981-82 900 models when
the use of gasohol or any alcohol enhanced fuels was unavoidable. The introduction of the adapter kit allowed for the installation of a M83 VDO fuel
level transmitter which proved to be more resistant to alcohol-enhanced fuels than the original M81-82 SKANDIA transmitter.

Spare Parts List:

Adapter Kit (P/N 85-46-491) contains the following parts:

Adapter Relay

85-89-400

Rear cable harness

85-46-509

Cable, ignition switch

85-46-764

Gray, blue cable harness

85-46-772

Bolt

79-22-354

Connector

85-21-668

INSTALLATION INSTRUCTIONS

1.

Perform Recall 257 using wiring kit P/N 85-47-002 (Recall S.I. 05/84-688).

2.

Disconnect negative lead from battery.

3.

Raise the seat cushion of the rear seat and fit the adapter relay to the seat beam.

Fuel Level Transmitter - Adapter Kit|Page 2716 > < Oil Pressure Switch - Revised Design