900 L4-1985cc 2.0L (1982)
Shifter M/T: Adjustments
Gear Lever For 4-Speed and 5-Speed Gearboxs
To Adjust the Gear Position
Up to and including chassis numbers:
AC1019985
AC2007011
AC3006958, 4-speed
AC3007495, 5-speed, carburettor engine
AC3007758, 5-speed, injection engine
AC6001775
BC6008944
1. Engage reverse gear and turn the ignition key to the locked position.
2. Move the gear lever back and forth. The selector rod should then move 3.5 +/- 0.5 mm (0.14 +/- 0.02 in). Adjust by moving the housing
longitudinally.
Use special socket 87 90 370 to release the gear lever housing nuts.
To Adjust the Gear Lever Spring Load