900 L4-1985cc 2.0L SOHC (1988)
Alignment: Service and Repair
Preliminary Check
1.
Ensure tires are inflated to correct pressure, and check for uneven wear.
2.
Check front wheel bearings, suspension arm bearing, ball joints and track rods for damage and replace components as necessary, to eliminate
improper alignment due to faulty components.
3.
Check rack and pinion steering gear and adjust as necessary.
4.
Check shocks for damage and replace as necessary.
5.
Rock vehicle backward and forward and bounce it upward and downward to settle vehicle prior to alignment.
6.
Ensure vehicle is unloaded and on a suitable alignment rack following manufacturers' instructions. When measuring equipment is attached
directly to outer end of driveshaft and front wheels are on turntables, apply brake to prevent improper vehicle movement.
