900 L4-1985cc 2.0L SOHC Turbo VIN S FI (1984)
![background image](/saab/900/l4-1985cc_2.0l_sohc_turbo_vin_s_fi/Page-1095003.png)
Figure 1
To improve the closing action of the convertible top, two rubber bushings for the top stack (Figure 1) were introduced into production at VIN L7006824.
The bushings cushion the closing action and prevent the top from contacting the windshield frame as the top is lowered. These bushings are suitable for
installation on earlier cars.
Parts Required
Rubber Bushing (qty 2)
P/N 75 13 724
Clip (qty 2)
P/N 41 53 839
Bushing Installation Procedure
1.
Adjust the position of the top as per step 1, page 800-4 in the 900 Service Manual 8:5 Convertible.
Figure 2
2.
Slide the rubber bushings onto the clips (Figure 2).
3.
Fit the bushing/clip assembly onto the hinge (one on the left side rail, one on the right side rail) between the front and middle side rail sections as
shown in Figure 2.
4.
Cycle the top stack to verify the closing action.
Warranty Information: