900 L4-1985cc 2.0L SOHC Turbo VIN S FI (1984)
Fuel Distributor: Service and Repair
The fuel distributor must not be dismantled but should be replaced when faulty. When separating the fuel distributor from the air flow sensor, make
sure that the control plunger does not fall out.
If the control plunger has been removed, it must be thoroughly cleaned in gasoline and reassembled. Avoid touching the plunger with the fingers.
On assembly of the fuel distributor, make sure that the O-ring is located in its groove. Torque the retaining bolts to 2.3-2.7 ft. lbs.