900 L4-1985cc 2.0L SOHC Turbo VIN S FI (1984)
4.
Hold the rubber bellows and spring in this position with one of the screwdrivers and install tool 87 92 020 over the bellows and spring, Figure 6.
Take care not to damage the rubber bellows.
5.
Remove the locking clamp, sealing ring and cover in front of the input shaft in the primary gear casing, Figure 7.
6.
Unscrew the disc shaft's plastic propeller.
7.
Install an M8 screw into the end of the input shaft and use the handle end of the lever tool to pry out the shaft. Leave the input shaft in the primary
gear casing and remove the screw from the end of the shaft, Figure 8.