900 L4-1985cc 2.0L SOHC Turbo VIN S FI (1984)
![background image](/saab/900/l4-1985cc_2.0l_sohc_turbo_vin_s_fi/Page-798006.png)
3. Use drift 87 90 800 to press in the seals so that they will be about 2 mm above the face of the bearing housing.
4. Adjust the bearing preload and the backlash. Refer to "Differential, Manual Transaxle/Adjustments/To Adjust the Differential Bearings". See:
Adjustments This applies only to the right-hand side.