900 L4-1985cc 2.0L SOHC Turbo VIN S FI (1984)
Figure 13
10.
Apply primer to the edge of the windshield, and to any areas of the windshield opening that are bare of old glue (Figure 13).
Figure 14
11.
Adjust the shape of the glue nozzle as shown in Figure 14. Warming the nozzle in hot water will make forming the nozzle easier.
Figure 15
12.
Apply a bead of adhesive to the windshield, adjusting the pressure on the applicator gun so that the adhesive will have the shape shown in
Figure 15.
Figure 16
13.
Hold the nozzle at right angles to the glass and apply the bead of adhesive along the edge of the strip retainer (Figure 16).