900 L4-2118cc 2.1L DOHC (1992)
Refer to the wiring diagram, Figure 1, and connect the heating pad to ground as follows:
1.
Locate the 3-pole connector of the seat switch for the heating pad, which is located under the passenger's seat. The seat switch is to be bypassed.
(Some cars also have a 3-pole connector for the seat switch which operates the seat-belt warning.)
NOTE
To be sure of locating the right connector, use an ohmmeter or a buzzer to check that an electrical connection exists between pin 5 of the 8-pole
connector under the passenger's seat and the 3-pole connector in question. When measuring with an ohmmeter, the 8-pole connector must be unplugged.
NOTE