900 L4-2118cc 2.1L DOHC (1992)
12. Fit intake camshaft sprocket. Keep chain tight between camshaft sprockets. Fit sprocket bolts and tighten by hand.
Resetting Chain Tensioner
NOTE: There are two types of tensioners used. Early style tensioners preset by pushing the spring-loaded piston all the way in and turning it until
it locks. Late style tensioners have a ratcheting mechanism. They can be preset by removing small bolt and spring at end of tensioner. Raise the
ratcheting pawl and push the lever in all the way.
Ratcheting type tensioner can be fitted to early engines. See: Timing Chain Tensioner/Service and Repair
13. Preset chain tensioner so it will not apply tension to chain when installed.
14. Fit tensioner to cylinder head. See: Timing Chain Tensioner/Service and Repair