900 L4-2118cc 2.1L DOHC (1992)
See Figure 10.
18.
If the AC compressor, power steering fluid reservoir and torque stay were previously removed, replace them. Turn the engine over one revolution
and check to see that the crankshaft and camshaft are lined up with respective timing marks.
19.
Fit the camshaft cover, spark plugs and ignition discharge module (if previously removed).
20.
Reconnect battery terminals.
Warranty Information:
For warranty repairs where the chain has not broken, time allowances are:
Model
Operation No.
Time Allowance
900 All
21531
1.9
9000 All
21531
1.5
Note:
Add comment in your 9000 Failure Code/Flat Rate Manual on pg. 2-11 that operation nos. 21521, 21526, and 21527 only apply if chain has broken.
Make a similar note in your 900 Failure Code/Flat Rate Manual on pg. 2-15 about Operation Nos. 21532 and 21521.
Add Labor Operation Number 21531 to your DCS Labor Op. Table. Beginning year is 85 and ending year is 99. Transmission code is 8 and engine
code is 1. Description is "R & R Timing Chain (In-Car)".