900 L4-2118cc 2.1L DOHC (1992)
Alignment: Service and Repair
Preliminary Check
1.
Ensure tires are inflated to correct pressure, and check for uneven wear.
2.
Check front wheel bearings, suspension arm bearing, ball joints and track rods for damage, replace components as necessary.
3.
Check rack and pinion steering gear and adjust as necessary.
4.
Check shock absorbers for damage, replace as necessary.
5.
Rock vehicle backward and forward, then bounce it upward and downward to settle vehicle prior to alignment.
6.
Ensure vehicle is unloaded and on an alignment rack following manufacturers' instructions. When measuring equipment is attached directly to
outer end of driveshaft and front wheels are on turntables, apply brake to prevent improper vehicle movement.
