9000 L4-1985cc 2.0L DOHC (1986)
Cut out the template attached to this S.I. and lay against the forward side of the vertical plate welded to the main hitch tube just ahead of the dead
bolt.
Mark the location of the holes as indicated by the template with a center punch and drill pilot holes. Drill out the holes with a 1/2" drill.
Remove burrs and paint the holes to prevent rust.
3.
Point out the correct safety chain attaching holes to the owner of the car.
As a rule, the installation/usage manual supplied with the kit should be given to the purchaser of the hitch. The manual gives the hitch operating
instructions.
Warranty Information:
For warranty claims, use Failure Code: 98601-04-0-04-05. Labor Allowance for either situation is 0.4 hour which should be
entered in the straight time area.
SAFETY CHAIN HOLE TEMPLATE
9000 TRAILER HITCH P/N 02 72 054