9000 L4-1985cc 2.0L DOHC (1986)
Action:
1.
Disconnect the battery terminals.
2.
Remove the ignition discharge module (IDM) if so fitted, spark plugs and camshaft cover. Place shop rags in the cylinder head to prevent debits
from entering the engine through the spark plug holes.
3.
Align the crankshaft and camshafts with their respective timing marks. Lock the flywheel in place using special tool P/N 83 92 987. See Figure 2,
A & B.
3.
Check the timing chain for wear by removing the chain tensioner plug with spring and locating stud (plastic) and then removing the chain
tensioner. Do NOT change the position of the plunger.