9000 L4-1985cc 2.0L DOHC (1986)
Receiver Dryer: Service and Repair
Removal
1. Drain the refrigerant from the system. For more information refer to "Draining and Filling of Refrigerant-R134a or R12". See: Refrigerant/Service
and Repair
2. Remove the cover from over the evaporator casing.
3. Unplug electrical connections - pressure switch.
4. Slightly retract the rubber strip and raise the pipe from the plastic lead-through. Unscrew the pipe connection. Plug connections.
5. Remove the receiver dryer (desiccant container) screw.
6. Detach connections to expansion valve.
7. Lift out the desiccant container. Plug all connections.