9000 L4-1985cc 2.0L DOHC (1986)
Throttle Body: Service and Repair
Throttle Body (not ETS)
Removal
1 Remove the hose before the throttle body.
2 Unplug the throttle position sensor connector.
3 Open the expansion tank cap and release the pressure in the cooling system. Screw the cap back on again.
4 Detach the hoses for throttle body preheating and plug them.
5 Detach the crankcase ventilation hose.
6 Remove the idle air control valve hose and the vacuum hoses from the throttle body.
7 Detach the throttle cable from the throttle lever. Cars with automatic transmission: Also detach the kick-down wire.
8 Remove the throttle body retaining bolts and lift out the throttle body.
Fitting