Windshield Removal and Installation for 9000 L4-1985cc 20L DOHC
Technical Service Bulletin # 0487959
Date: 870401
Windshield - Removing/Installing
FILE IN S.I. Man VOL. I
SEC. B-8
PG. 15
Service Information
SUBJECT:
REMOVING/INSTALLING WINDSHIELD ISSUE: 04/87-959
APPLICATION: SAAB 9000
Various windshield configurations have been used during the production of the Saab 9000. The different types are described here as well as a new
removal and installation procedure. This procedure differs slightly from the one in your Service Manual (Section 8, p. 843-4). Please mark your book.
Version I - 82-83-962
5.8 mm thick
M86 M87 up to H1005251
Version II - 82-84-010
5.5 mm thick
M87 H1005252-H1014799
Version III - *
5.5 mm thick
4 metal straps bonded to glass
M87 H1014800-
The chassis numbers listed above reflect the windshield versions as installed on the production line. All three versions can be used in any 9000 for
replacement purposes. However, please note that Version I uses a different cover moulding than Version II and III. These cover strip mouldings are not
supplied with the windshield kit. Please consult the 9000 Spare Parts Microfiche and any current Microfiche Discrepancy Bulletins to ensure that the
appropriate cover moulding for each particular usage is on hand.
*Version III is not yet available as a replacement part. Version I or Version II are currently available and may be used for all applications. The bonded
straps on Version III are used solely as an installation aid and do not contribute to the integrity of the windshield in the car.
Windshield Removal & Installation Information