9000 L4-1985cc 2.0L DOHC Turbo EFI (1987)
Evaporator Core: Service and Repair
Rear Evaporator Core Installation
Installation:
1. Place evaporator in casing. The inner grooves are for the evaporator, and the outer for the fresh air filter.
2. Place the recirculation flap and fresh air filter in position. Fit the upper part of the evaporator casing and the plastic clip. Check that the
recirculation flap is in the correct position. Change the seal if it is damaged.
3. Fit the anti-freeze thermostat. Check that the capillary tube is in the right position (bottom).
4. Fit the recirculation motor.
5. Fit the expansion valve. Do not do up the connections.