9000 L4-1985cc 2.0L DOHC Turbo EFI (1987)
Traditional Robinair service equipment with flushing equipment. This equipment requires access to Robinair draining and flushing equipment for
R12. This equipment must be complemented with a flushing kit for flushing the car's A/C system. This alternative requires that the mechanic is in
position beside the car during the entire work process in order to monitor and control the process.
Tips When Selecting Equipment
When selecting equipment, it may be helpful to also assess the following factors:
-
If draining and flushing equipment for R12 is available in the workshop:
-
Assess the number of expected conversions and the necessity of the solenoid valve kit. The flushing unit must be procured in order to carry out
conversions.
-
If there is no service equipment for A/C work in the workshop or if the number of conversions if expected to be more than 3-5 per week: AKA
Mini Force equipment is the fastest equipment of the three alternatives and should be chosen if there is no equipment. If there is existing
equipment, this equipment may still be the most cost-effective alternative, despite higher initial cost, as it can also be used as traditional service
equipment for cars with R12 A/C systems. In addition, only half as much time is required by the mechanic for converting when compared with
alternative 2.
Hose Couplings to Compressor
Hose Couplings To Compressor - Sanden
Check that all cocks are closed on the equipment. The couplings to the compressor service connections are ordinary screw couplings and must
only be tightened by hand.
