9000 L4-1985cc 2.0L DOHC Turbo EFI (1987)
29
Brake light switch
At the brake pedal
30
Brake lamps
In the rear light clusters
57
Three-pole connector
One in the luggage compartment lid
One behind the combined instrument
59
Two-pole connector
In the luggage compartment lid
82
Seat belt/ignition switch warning relay
In the electrical distribution box behind the glove compartment
109
High-level brake light (US, CA)
Inside the rear window
110
Tachometer
In the combined instrument
122
Eight-pole connector
At the left-hand rear wheel housing
132
Sensor for the speed transmitter
In the speedometer
158
Negative distribution terminal
In the electrical distribution box behind the glove compartment
159
Distribution terminal +15
In the electrical distribution box behind the glove compartment
213
Pictogram
In the combined instrument on the facia
228A Filament monitor
In the electrical distribution box behind the glove compartment
230
Distribution terminal +30
In the electrical distribution box behind the glove compartment
258
Eight-pole connector for the trailer lighting
At the left-hand light cluster
Operation
The supply to brake light switch 29 is taken from fuse 24. When the switch is actuated, brake lights 30 will be energized across filament monitor
228A.
The brake lights of the trailer are supplied directly from the brake light switch across connector 258 for the tow bar.
If one of the brake light bulbs should fail,the relay for the brake lights in the filament monitor will be energized and terminal C1 will be earthed. Since
a positive voltage (from fuse 13) is supplied to terminal 7 (1987)/terminal 9 (1988) of the pictogram, the warning lamps for the rear lights and the
central warning lamp will light up. See also the section entitled "Pictogram - Filament monitor".
Cars for the US, CA, JP, ME, FE and AU markets are fitted with two extra leads/jumper cables on the brake lights so that two lamps will light up on
each side of the car. Cars for the SE, FI and GB markets are not fitted with these leads.
US and CA markets
Cars for the US and CA markets are also fitted with brake light 109.
The filament monitor for this market includes an extra function for brake light 109. Should the light bulb fail,terminal C1 will be earthed and the
warning lamps for the rear lights and the central warning lamp in the pictogram will light up.