9000 L4-2290cc 2.3L DOHC (1991)
Traction Control Module: Service and Repair
W/Manual Transmission
ETS ECU
The replacement ETS ECU must be recalibrated.
1.
Move driver's seat to fully forward position with backrest also angled forward.
2.
Disconnect battery ground cable.
3.
Loosen two clips and fold carpet up under seat.
4.
Remove protecting plate mounting screw. Position plate aside.
5.
Remove control unit from under spring tensioned bracket. Disconnect connector housing from ECU.
6.
Remove cover plate. Lift out ECU and disconnect connector.
7.
Reverse procedure to install. Calibrate new ECU.
TC/ABS ECU
1.
Disconnect battery ground cable.
2.
Remove two mounting screws, then lift out ECU and disconnect connector.
3.
Reverse procedure to install.