9000 L4-2290cc 2.3L DOHC (1991)
Right-hand Side
a. Remove the right-hand light cluster and headlamp as well as the relevant wiring harness.
b. Open the protective sleeving round the wiring harness for the lamps and sensor. Withdraw the leads for the sensor about five cm through the
slit in the sleeving or as much as is needed for the leads to reach the sensor.
c. Wrap insulating tape round the sleeving to close up the slit.
d. Refit the headlamp and front light cluster.
e. Continue as described in points 6 and 7.