saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Recall - Fitting Of Protective Oil Cooler Cover|Page 1594 > < Engine Oil|Capacity Specifications|Page 1585
Page 1
background image

Technical Service Bulletin # 10940512

Date: 941001

Recall - Fitting Of Protective Oil Cooler Cover

CATEGORY 
RECALL

SECTION 
9

PAGE 
12

ISSUE
10/94-0512

CODE
261

Subject:
Recall 289 Fitting of Protective Oil Cooler Cover

Application:
1992-94 9000 Models Equipped with Engine Oil Cooler
NHTSA 94V-126

Saab Cars USA, Inc. has notified the National Highway Traffic Safety Administration (NHTSA) that a defect which relates to motor vehicle safety may
exist in certain 1992-94 9000 models equipped with engine oil coolers.

On 1992-94 9000 models equipped with engine oil coolers, it is possible that in relatively minor collisions (such as with deer), where the car is hit above
the bumper at the right front. the oil cooler and/or the hoses attached to the cooler can be damaged. This may result in post-collision oil leakage onto the 
exhaust manifold and risk of a fire. A special protective cover has been designed and should be fitted.

Vehicles Involved

Vehicles Affected:
1992-94 9000 models equipped with engine oil coolers within the following VIN Serial No. ranges:

N1000001-R1027659

Recall Schedule:

Saab Press Release

July 29

Dealer Notification (DOS E-Mail)

Aug. 3

PSI Bulletin issued

mid-Oct.

Parts Issued

late-Oct.

Owner Notification

Oct. 25

Start of Repairs

Oct. 25

Parts and Warranty Information

Parts Required:

Protective cover kit

4396347 Qty. 1 = 1

(Kit has parts for both types of oil coolers)

An initial parts order equal to 25% of the vehicles appearing on your Status List will be released automatically to you commencing late-October.
Additional parts should be ordered using VOR ordering procedures.

Warranty Information:

A Recall Claim may be submitted after the repair is completed with the following information:

Failure Code: 10289-31-0-1. Recall Action Code (RAC) = 3 must be used.
Operation No.: 10289 for 0.4 hr. (includes cover installation and 0.2 hr. administration time).

The following information must be added to your DCS table:
Failed Part: 10289-0il Cooler Cover/Recall 289

Recall - Fitting Of Protective Oil Cooler Cover|Page 1594 > < Engine Oil|Capacity Specifications|Page 1585