9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Electronic control module, SE/US/CA
1
Cars without passenger airbag
Remove the glove compartment and air distribution damper.
Cars with passenger airbag
Remove the complete airbag, including the bracket and the air distribution damper.
2
Carefully push up the air duct on the passenger side.
3
Drill out the pop rivet securing the electronic control module. Use a drill with a drilling stop.
4
Remove the two screws on the electronic control module (from underneath). Lift out the electronic control module.
5
Unplug the connector to the electronic control module.
6
Install in reverse order