9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
3. Connect the voltmeter's positive lead to the connector pin that is to be checked.
4. If the voltage here should be the same as the battery voltage, it ought not to differ by more than about 1 Volt.
Checking For Short-Circuit to Power Supply
Checking For Short-circuit To Power Supply
1. Disconnect the fuse from the system to be checked.
2. Connect one of the voltmeter's leads to B+.
3. Connect the other voltmeter lead to the point in the circuit to be checked.
Take a reading on the load side of the wiring harness and work outwards to the circuit's grounding point.
4. If the voltmeter shows a reading, it indicates that voltage is present at the point concerned.