saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Heated Element, Mirror|Description and Operation > < Diagram Information and Instructions|Page 6458
Page 4
background image

Grounding  Points

G6

Grounding point, negative distribution terminal, in main fuse box 22B behind the glove box.

G8

Grounding point, dashboard, beside the front left-hand loudspeaker socket.

DESCRIPTION OF OPERATION

The door mirrors are operated with a four-position switch and a selector on the driver's door.

Heating for the door mirrors is turned on with the switch for the electrically heated rear window.

Current is supplied from fuse 2 to terminal 3 on operating switch 124 which has four positions. Using selector 125, you can choose which of the
two door mirrors, left or right, is to be adjusted with switch 124.

Electrically Adjustable and Heated Door Mirrors: Switch Connections

Check in the table above that the switch connections are supplied with current and grounded in each position:

FAULT DIAGNOSIS HINTS

The door mirrors will be operative when the ignition switch is in the Drive position.

1. Check that fuse 2 is intact and supplied with current.
2. Check the voltage on terminal 3 of switch 124. 
3. Check that current is supplied to motors 126 and 127 by activating the switches.
4. Check the connectors, wiring harness and ground connections.

Heated Element, Mirror|Description and Operation > < Diagram Information and Instructions|Page 6458