9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
3
Connect the hose to the crankcase ventilation.
4
Check the 0-rings in the throttle body.
-
Check both 0-rings for the vacuum plate and the mating surface. Lubricate with a little Vaseline.
5
Fit the throttle body in place, attach the cable conduit and tighten the nuts to: 8 Nm (6 ft lb)
6
Connect all hoses to the throttle body.
7
Fit the intake manifold and the resonance box and all other parts that have been removed.
Important After fitting, check/adjust the throttle cable and the kick-down cable (where fitted) using special tool part No. 87 92 459, refer to
Powertrain Management.
8
Fit the engine covers.
9
Test drive and check the TCS is working properly.