9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
1. Install the secondary piston with new seals, if necessary.
-
Since the primary piston's front seal cannot be changed, it will be necessary to change the entire piston assembly if the seal is damaged.
2. Install the secondary piston's spring and retaining ring.
3. Lubricate the seals and cylinder bore with brake fluid.
4. Install the secondary piston's plastic sleeve.
-
Insert the secondary piston into the cylinder bore.
-
Take care not to damage the seals.
5. Insert the primary piston into the cylinder bore.
-
Take care not to damage the seals.
6. Press in the primary piston and install the secondary piston's stop pin back in place.