9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
1. Install a new 0-ring and screw in the pressure switch.
-
Tighten to: 23 Nm (17 ft lb)
2. Plug the electrical connector into the pressure switch.
3. Install the damping rubber on the pressure pipe.
4. Switch on the ignition and check that the brake and Antilock Brake System (ABS) warning lamps go out.
5. Check that there are no leaks in the brake system.
6. Drive the car on test to check that the brake system is in perfect working order.