9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
11. Remove the ignition coil and disconnect the ignition leads.
12. Undo the clamps between the oil lines.
13. Raise the car and remove the oil filter. Remove the crankshaft position sensor.
14. Undo the oil lines at the oil filter.
15. Undo the bolt holding the check valve bracket.
16. Lower the car to the floor and remove the pipes at the heat exchanger.
17. Remove the two heat exchanger retaining nuts.
18. Remove the cover and lift out the heat exchanger.
Installation