saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 6915 > < Diagram Information and Instructions|Page 6913
Page 4
background image

^

Warning lamp 47L

When the three-way catalytic converter temperature rises to between 800°C and 850°C, the warning lamp lights up and remains alight until the
temperature drops by about 10°C.

When current (+15 circuit) is applied to relay pin 1, the warning lamp is grounded and lights up for about 3 seconds. The lamp does not light up
again unless the temperature of the three way catalytic converter exceeds the limit value.

As the temperature rises, the current between pins 3 and 4 of the temperature sensor changes. When the change in the resistance of the sensor is
sufficiently large, the relay function is activated and the warning lamp lights up.

Similarly, the warning lamp goes out when the temperature drops or when the supply current (+15 circuit) is broken, i.e. when the ignition is
switched off.

FAULT DIAGNOSIS HINTS

When current (+15 circuit) is applied to relay pin 1, the warning lamp is grounded and lights up for about 3 seconds.

If the lamp stays on, there is a break in the temperature sensor circuit. Normally, the warning lamp goes out and does not light up unless the
temperature exceeds the limit value.

1. Check that fuse 13 is intact and that current is supplied to the temperature sensor and relay.
2. Also check the connectors, wiring harness and ground connections.

Diagram Information and Instructions|Page 6915 > < Diagram Information and Instructions|Page 6913