9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Refrigerant Oil: Service and Repair
Compressor Oil - Topping Up and Adjusting For R134a
Important : Both the desiccant container and the compressor oil in the R134a system absorb water from the air, which cannot then be removed. For this
reason, any connections which are open should be immediately plugged.
To Remove
1
Drain the refrigerant from the A/C system.
2
Remove the cover from underneath, behind the front spoiler.
3
Remove pressure hose and lift out the compressor from underneath.
4
Remove vacuum hose.
To Install
5
Adjust oil level.
6
Lubricate two new O-rings using synthetic vaseline, part number (16) 30 15 286. Remove the plugs and place the new O-rings in position.
7
Install the vacuum hose and lift the compressor into position from underneath.
8
Install the pressure hose.
9
Install the high-pressure hose with the clip.