9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
![background image](/saab/9000_cde/v6-2962cc_3.0l_dohc_(b308)/Page-790001.png)
Fuel Pressure Regulator: Service and Repair
To Remove
1. Remove the engine covers. Be sure to have some absorbent paper or the like at hand to soak up any fuel that runs out of the fuel pressure regulator.
2. Undo the screw and open the clamp.
3. Remove the vacuum hose.
4. Remove the pressure regulator.
To Fit
Fit in reverse order.
Lubricate the O-ring with a little petroleum jelly (vaseline) before fitting.
WARNING:
Work only in a well-ventilated area. If approved equipment for the extraction of fuel vapours is available, be sure to use it.
Wear suitable gloves. Prolonged contact with fuel may give rise to skin irritation or dermatitis.
Keep a class BE fire extinguisher near at hand. Be mindful of the danger of sparks caused by short circuits and when connecting and disconnecting
leads in electrical circuits.
No smoking anywhere in the vicinity.