9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Throttle Body: Technical Service Bulletins
Engine - Replace Throttle Control Plate During PDI
CATEGORY
Engine
SECTION
2
PAGE
53
ISSUE
05/95-0578
CODE
271
Subject:
Additional PDI Action: Replace Throttle Control Plate to Improve Throttle Response, Kick-Down Function
Application:
1995 9000 CDE Models with V6 Engine Vin Serial No. S1000001-S1022771
At the PDI, please replace the throttle control plate using P/N 4528 147 (listed below) on all vehicles within the affected VIN Serial No. range. This part
can also be used to address a customer complaint of poor throttle response. The new throttle control plate increases the rate of throttle opening at light
throttle pedal movement.
Parts:
Throttle control plate
45 28 147
Action:
1.
Remove the left-hand engine cover. It is secured in 3 places:
a.
T-30 screw as shown in Figure 1, point a.
b.
Rubber strap as shown in Figure 1, point b.
c.
Plastic clip (part of cover itself) as shown in Figure 1, point C.