9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Throttle Control Actuator: Service and Repair
Removal
1
Remove the engine covers.
2
Disconnect the control rod from the throttle.
3
Release the bracket fastenings.
4
Remove the control plate bracket.
5
Undo the hose clamp securing the mass air flow sensor to the resonator box.
6
Open the two snap locks between the mass air flow sensor and the air cleaner.
7
Unplug the connectors and remove the mass air flow sensor.
8
Remove the idle air control valve hose on the inlet manifold.
9
Undo the hose clamps between the inlet manifold and the throttle body.
10
Lift the intake manifold complete with resonance box.
-
Remove the two vacuum hoses from the vacuum tank and the outer throttle control valve as well as the electrical connectors for the control
valve.
11
Remove the intake manifold and the resonance box.