9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Action 1:
Cars with Manual A/C:
1. Remove the rubber seal and cover panel over the bulkhead partition space. Disconnect the washer fluid hose.
2. Remove the right-hand screening panel.
3. Unplug the fan resistor's connector.
4. Undo the clip and withdraw the fan resistor.
5. Fit a new resistor.
6. Plug in the connector.
7. Check the fan's current consumption as described on page 4.
8. Refit the screening panel.
9. Reconnect the washer fluid hose. Refit the panel and rubber seal over the bulkhead partition space.