9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
2.
Remove the battery and cover.
3.
Open the distribution block for B+ and undo the battery connection.
4.
Undo the clamp holding the positive cable from the battery tray. Remove the clamp from the cable.
5.
Unplug the black 4-pin connector on the positive cable harness on the left rear side of the engine.
6.
Cut the cable to the positive cable terminal and the harness to the 4-pin connector that are on the positive cable wiring harness.
7.
Unscrew the positive cable mounting bracket on the rear left side of the engine. Detach any cable ties/connectors that are fastened to the bracket.
8.
Raise the car.
9.
Disconnect the B+ and D+ connections on the generator.
WARNING
There is a risk of burn injuries if the gearbox/engine/exhaust is warm.
10.
Disconnect the solenoid and B+ connections on the starter motor.