9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Trailing Arm Bushing: Service and Repair
Front Bush (Bushing)
REPLACEMENT
It is sufficient that the link arm is unfastened at the front edge when changing the front bush.
1. Remove the bush complete with the mounting from the fink arm.
2. Remove the mounting from the body.
3. Fit a new bush with a mounting on the fink arm. Do not tighten the mounting on the link arm before the it is fitted to the car, and the car is standing
on the ground.
4. Fit the front link arm mounting to the body.
5. Lower the car. Tighten the mounting between the bush and the link arm.
Tightening torque for the front link arm mounting to the body: 52 Nm (38 ft. lbs.)
Tightening torque for the bush to the link arm: 47 Nm (35 ft. lbs.)