9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
![background image](/saab/9000_cde/v6-2962cc_3.0l_dohc_(b308)/Page-977007.png)
9. Lower the car. Remove the lifting beam.
10. Install the torque arm.
11. Remove the lifting eye and install it in its place on the lefthand side.
-
Reconnect the grounding cable.
12. Connect the hose for the crankcase ventilation to the camshaft cover.
13. Lift the car.
-
Tighten the three screws to the engine mounting.
-
Tightening torque: 49-91 Nm (34.5-65.5 ft. lbs.)
14. Install the drive shaft.
15. Install the three screws in the wishbone to the ball joint.
-
Tightening torque: 26-34 Nm (19-25 ft. lbs.)
16. Install a new clamp to the rubber gaiter over the universal joint.
17. Install front right wheel.
-
Tightening torque: 120 Nm (89 ft. lbs.)
18. Connect the battery's grounding cable.
Overhaul