9000 CS L4-2290cc 2.3L DOHC Turbo EFI (1996)
Manifold Pressure/Vacuum Sensor: Specifications
Voltage Output
Voltage Output
voltage
0.48 V at 25 kPa
Note: Approximate voltage. Power supply 5 V. Pressure
in kPa is absolute pressure, i.e. 100 kPa corresponds to
barometric pressure. when checking the pressure sensor
using a pressure/ vacuum pump, somewhat lower voltage
readings may be obtained at high altitudes
0.95 V at 50 kPa
Note: Approximate voltage. Power supply 5 V. Pressure in
kPa is absolute pressure, i.e. 100 kPa corresponds to
barometric pressure. when checking the pressure sensor
using a pressure/ vacuum pump, somewhat lower voltage
readings may be obtained at high altitudes.
1.9 V at 100 kPa
Note: Approximate voltage. Power supply 5 V. Pressure in
kPa is absolute pressure, i.e. 100 kPa corresponds to
barometric pressure. when checking the pressure sensor
using a pressure/ vacuum pump, somewhat lower voltage
readings may be obtained at high altitudes.
2.4 V at 125 kPa
Note: Approximate voltage. Power supply 5 V. Pressure in
kPa is absolute pressure, i.e. 100 kPa corresponds to
barometric pressure. when checking the pressure sensor
using a pressure/ vacuum pump, somewhat lower voltage
readings may be obtained at high altitudes.
2.8 V at 150 kPa
Note: Approximate voltage. Power supply 5 V. Pressure in
kPa is absolute pressure, i.e. 100 kPa corresponds to
barometric pressure. when checking the pressure sensor
using a pressure/ vacuum pump, somewhat lower voltage
readings may be obtained at high altitudes.
3.3 V at 175 kPa
Note: Approximate voltage. Power supply 5 V. Pressure
in kPa is absolute pressure, i.e. 100 kPa corresponds to
barometric pressure. when checking the pressure sensor
using a pressure/ vacuum pump, somewhat lower voltage
readings may be obtained at high altitudes