9000 CS L4-2290cc 2.3L DOHC Turbo EFI (1996)
Alarm Module: Description and Operation
ECM Power Supply and Gnd, Anti-Theft Alarm
Electronic Control Module Power Supply
-
The +30 power supply goes direct to pin 25 of the control module. There is no fuse in this circuit. (In certain markets the +30 power supply goes
via fuse 19).
-
The +15 power supply goes direct from distribution terminal 159 to pin 10 of the control module. There is no fuse in this circuit.
-
The +50 power supply goes to pin 20.
Electronic control module ground
Electronic control module main ground (pin 13) is connected to grounding point G6.