9000 CS L4-2290cc 2.3L DOHC Turbo EFI (1996)
15. Remove the screws securing the combined instrument and lift up the instrument.
16. Unplug the pictogram connector on the left-hand side of the combined instrument.
17. Remove sleeve 8 from the connector. The sleeve has a blue lead. Clip the sleeve off the lead and insulate the lead.
If The Car Is Fitted With A Passenger Airbag
a. Remove the plastic covers from over the two screws securing the lower cover panel. Remove the screws.
b. Pull the lower cover away (this is also held in place with clips). Use tool 82 92 997 and work from right to left. Do not use force.
c. Unplug connector H2-77 to the passenger airbag.
Tape up the connector on the rejected cable assembly so that it cannot rattle.
Installing SRS Spare Cable Assembly
1. Position the cable assembly in the car, starting with the SRS control module.