9000 CS L4-2290cc 2.3L DOHC Turbo EFI (1996)
Malfunction Lamp / Indicator: Description and Operation
SRS Lamp
Faults in the system are indicated by the SRS symbol on the combination instrument pictogram lighting and staying lit.
When the ignition key is turned to the start or drive position. the SRS lamp lights for 3-4 seconds and then goes out, providing no trouble codes are
stored.
If there are trouble codes stored, the lamp will light for 3-4 seconds, go out for a half a second and them shine constantly until the ignition is switched
off or the trouble codes are erased.
If the airbags have been activated, the SRS lamp stays lit.
SRS Lamp Voltage Feed
The SRS lamp voltage feed is via fuse 13 and is grounded by the control module via pin 7.
If the control module connector is disconnected, when the ignition is switched on, the lamp is grounded via a short-circuiting strap to pin 6 in the
connector and stays lit.
