9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
RES/-:
Current is supplied to terminals A and C of the control module. Two functions are available in this position:
1
After activation of the brake or clutch pedal, the Cruise Control can be reset to the original speed by pressing RES/-.
2
It the button is held in the RES position, the car will gradually slow down. The new speed will be stored in the memory when the button is
released. If the button is pressed briefly, the speed of the car will be reduced in steps of 1.6 km/h (1 mph).
SET/+:
At the end of the direction indicators stalk is a spring loaded SET/+ button. When this button is pressed, current is supplied to terminal B of the control
module. This button controls two functions:
1
If the SET button is pressed while the Cruise Control system is activated, the current speed will be stored in the Cruise Control memory.
2
If the SET/+ button is kept depressed, the car will gradually pick up speed. The new speed will be stored in the memory when the button is
released. If the button is pressed briefly, the speed of the car will increase in steps of 1.6 km/h (1 mph).
